Breeze
The circle-in-a-square of a midcentury breeze block, cut in steel instead of cast in concrete: a grid of 4-inch circles with a small diamond where every four cells meet. It filters light and wind the way the blocks do, at a tenth of the weight, and it takes paint if you want it in a color.
- Open area
- 28%privacy high
- Weight
- 41 lb14ga steel
- Cut path
- 87 ft102 pierces · 5.6 min on a fiber laser
- Mounting
- 6 holes5/16″, 1½″ in from the edge
Price includes powder coat and shipping in the lower 48; the address and any sales tax go in at checkout. Want to cut it locally? The file is the pattern. Most people price one panel at a shop, find ours costs less, and come back for it.
- Cuts clean the first time: ribs never under ¾″, one piece of steel, no islands
- Drops into any panel-ready frame plan at this size; the frame plan is included with cut panels
- The file is yours to keep. Cut it as many times as you like
Three files, one panel, ready for the machine.
Everything is in inches and every contour is closed, so it loads straight into LightBurn, Fusion, SheetCam or a plasma table’s own software with nothing to clean up.
- DXF (R12)Cut lines on layer CUT, the mounting holes on layer HOLES. The format every CAM reads.
- SVGThe same contours as hairline strokes, for LightBurn, Inkscape and the Glowforge/xTool crowd.
- Proof sheet (PDF)The panel drawn at scale with its code, size, weight, open area and the rules it was checked against.
- Your libraryFiles live in your plan library, so a lost download is never a problem. Change the size later: the file is regenerated.
| Size | Open | Weight | Cut to order | File |
|---|---|---|---|---|
| 24 × 48Fence insert, gate, trellis | 24%high privacy | 19 lb | $289in 2–3 weeks | $15 |
| 30 × 60Pergola canopy and side screens | 26%high privacy | 29 lb | $399in 2–3 weeks | $15 |
| 36 × 72Privacy screen bay | 28%high privacy | 41 lb | $539in 2–3 weeks | $15 |
14ga steel. Cut-to-order prices are per panel with textured black powder coat and parcel shipping in the lower 48, shipped flat in 2–3 weeks; custom sizes are $29 as a file and quoted cut. Ribs never thinner than 0.75″ at any size.
The Dapple Pergola.
Breeze is drawn for the canopy and side screens of a timber pergola. The frame is a Maker plan from the Yard collection: 6x6 posts and doubled 2x8 beams from Home Depot on black Outdoor Accents hardware, uncut 2x6 rafters in pairs so every panel edge lands over its own rafter, and the posts a panel apart so the same panels screen any side. Every panel screws down through its own six holes; nothing is captured, so a panel swaps in minutes.
Order the panels cut from a frame plan’s page and the plan is included with them. See the Dapple Pergola plan
Good to know
Which size should I buy?
The three standard sizes are the OL bay: every panel-ready frame plan is drawn around them, so a standard panel moves between projects. Pick custom when you are fitting an opening you already have, and measure the opening, not the frame: the panel wants a quarter inch of play on each side.
Does the file change when I change the size?
Yes, and that is the point. The pattern is generated for the size you pick: the border stays 2 inches, the ribs stay over 0.75 inch, the holes land in the border. A scaled drawing would thin the ribs and move the holes into the pattern.
What do I get when I order it cut?
A 14-gauge steel panel, laser cut in Texas, powder coated in textured black on both sides, with the mounting holes drilled and the corners rounded, shipped flat in a padded box. Standard sizes ship parcel in 2–3 weeks from the day we confirm the price. Bigger panels are crated and go by freight, quoted first.
Should I buy the file or the panel?
If you have a plasma table or a fiber laser, the file: it is the same file the shop cuts from. If you don’t, the panel. Cutting one panel at a local shop means a setup fee, a sheet minimum and a powder coater’s minimum, and the quote usually lands above our price; we nest panels dozens to a sheet at trade rates and coat them in batches. Buy the file first if you like, price it around, and the panel is here when you come back.
Can I paint it?
Powder coat takes paint well: scuff it, prime with a bonding primer and use an exterior enamel. Most people leave it black against cedar.